SECTION 656 — PAVED SHOULDERS TYPE 6, TYPE 6-F, TYPE 6-l, AND TYPE 6-S

656.1 DESCRIPTION — This work is construction of paved shoulders of the type indicated and preparation of the underlying surface.


656.2 MATERIAL —

• Bituminous Concrete Base Course — Section 305.2
• Bituminous Surface Treatment — Section 480.2
• Shoulder Backfill (if required) — Section 350.2
• Bituminous Wearing Course, FJ-1 — Section 422.2
• Bituminous Wearing Course, ID-2, SRL — L — Section 420.2
• Slurry Seal — Section 482.2

656.3 CONSTRUCTION — As shown on the Standard Drawings; as specified in Section 654.3(a), (b), (c), (e) and (f); and as follows:

(a) Bituminous Concrete Base Course. Section 305.3

(b) Bituminous Surface Treatment (For Type 6). Section 480.3, to a depth of 3/4-inch.

(c) Bituminous Wearing Course, FJ-1 (For Type 6-F). Section 422.3, to a depth of 1 inch.

(d) Bituminous Wearing Course, ID-2 (For Type 6-I). Section 401.3, to a depth of 1 1/2 inches.

(e) Double Slurry Seal (For Type 6-S). Apply a seal, as specified in Section 482.3, to a total depth of 3/4-inch.


656.4 MEASUREMENT AND PAYMENT —

(a) Paved Shoulders. Square Yard

(b) Shoulder Backfill. Cubic Yard or Ton Includes excavation below the bottom of the proposed base course.

No Supplement

BACK TO TABLE OF CONTENTS