Publication 41 - Producers of Bituminous Mixtures: Bulletin 41
Current as of May 9,, 2013













COMMONWEALTH OF PENNSYLVANIA
DEPARTMENT OF TRANSPORTATION

Bureau of Construction and Materials
Materials and Testing Division
81 Lab Lane
Harrisburg, PA 17110

B U L L E T I N 4 1
P u b l i c a t i o n 4 1
PRODUCERS OF BITUMINOUS MIXTURES

The producers listed in this Bulletin have demonstrated their capability to comply with the Department's specification requirements (Publication 408 [M], Section 401.3(b) and Publication 27, chapters 1 and 1A) for the production of bituminous mixtures as determined by inspection of their plants and facilities.

Prospective producers offering a plant for approval shall request plant inspection from the appropriate District Materials Engineer in the District where the plant is located. It is the responsibility of the Bureau of Construction and Materials to approve the listing of bituminous mixture plants in Bulletin 41, following the plant inspection and recommendation for approval by the District Materials Engineer. Upon the submission of a properly completed Bituminous Concrete Plant Inspection Report (Form TR-498) from the District to the Bureau of Construction and Materials, Materials and Testing Division, with a recommendation for approval, the plant will be listed in Bulletin 41.

Any Bituminous Concrete Plants offered for Department approval shall be fully AUTOMATED and RECORDATED or equipped with recording scales. All currently approved plants are required to be fully AUTOMATED and RECORDATED or equipped with recording scales to maintain their approval status.

All Bituminous plants will be required to have an inspector's office, adequate laboratory equipment, space, and utilities as required for the performance of specified tests (See Bulletins 25 and 27) in place, operating effectively and approved prior to any listing in Bulletin 41. The only exception to this will be the water cooled, abrasive circular saw. Each plant will not be required to have its own saw providing, at the District Materials Engineer's discretion, all required testing and daily certification (Form TR-465) is done no later than the next day. If this cannot be accomplished, each plant or location must have the saw.

All plants shall be reinspected biennially for compliance and an inspection report (Form TR-498 or TR-498A) submitted by the District to the Bureau of Construction and Materials, Materials Testing Division. When conditions warrant, plants shall be inspected annually.

After the initial approval has been made, the plant will remain on the approval list until such time as it is deleted for any of the following reasons:

1. Any actions or inactions that may affect the quality of the product, the integrity of the test results or the applicable Quality Control Plan.
2. The plant facilities fail to meet specification requirements.
3. The operation is completely inactive for two years.
4. Major changes in equipment or procedures that will affect the quality of the product.
5 .Removal of plant and facilities from its site. Relocation of portable plants will be permitted upon request to the Materials and Testing Division.

COUNTY CODE IDENTIFICATION


County
Dist. No
County
Dist. No
01 Adams
8-1
34 Juniata
2-9
02 Allegheny
11-1
35 Lackawana
4-2
03 Armstrong
10-1
36 Lancaster
8-7
04 Beaver
11-2
37 Lawrence
11-4
05 Bedford
9-1
38 Lebanon
8-8
06 Berks
5-1
39 Lehigh
5-3
07 Blair
9-2
40 Luzerne
4-3
08 Bradford
3-9
41 Lycoming
3-2
09 Bucks
6-1
42 McKean
2-5
10 Butler
10-2
43 Mercer
1-4
11 Cambria
9-3
44 Mifflin
2-7
12 Cameron
2-4
45 Monroe
5-4
13 Carbon
5-2
46 Montgomery
6-4
14 Centre
2-1
47 Montour
3-3
15 Chester
6-2
48 Northampton
5-5
16 Clarion
10-3
49 Northumberland
3-4
17 Clearfield
2-2
50 Perry
8-9
18 Clinton
2-3
51 Pike
4-4
19 Columbia
3-1
52 Potter
2-6
20 Crawford
1-1
53 Schuylkill
5-6
21 Cumberland
8-2
54 Snyder
3-5
22 Dauphin
8-5
55 Somerset
9-7
23 Delaware
6-3
56 Sullivan
3-6
24 Elk
2-8
57 Susquehanna
4-5
25 Erie
1-2
58 Tioga
3-7
26 Fayette
12-1
59 Union
3-8
27 Forest
1-3
60 Venango
1-5
28 Franklin
8-3
61 Warren
1-6
29 Fulton
9-4
62 Washington
12-4
30 Green
12-2
63 Wayne
4-6
31 Huntingdon
9-5
64 Westmoreland
12-5
32 Indiana
10-4
65 Wyoming
4-7
33 Jefferson
10-5
66 York
8-4
67 Philadelphia6-5


PP = Portable Plant

STATE CODE IDENTIFICATION


CT = ConnecticutMI = Michigan OH = Ohio
DE = DelawareNJ = New JerseyOT = Ontario
IN = Indiana NY = New YorkVA = Virginia
MD = MarylandNC = North CarolinaWV = West Virginia

BULLETIN 41
REFERENCE SHEET


Column one:Company Name and Mailing Address
Column two:Location of Plant
Column three:Company Code Example: AAA00A
    AAA = Code for Name of company
    00 = County number (01 is Adams and 66 is York)
    A = A, B, etc. are the 1st, 2nd, etc. plant in county
Column four:Approval Date, month/day/year of latest approval
    Example: 12/02/95 = December 12, 1995
Column five:month/year of original approval
    Example: 06/75 = June 1975
    00/00 = Unknown month or year
Column six:Two letter code of manufacturer
Column seven:Plant type:
1st letter:
A = Fully automated with recordation
B = Automated
C = Manual
D = Auto/Rec truck scales

2nd letter:
B = Batch Mixing
C = Continuous Mixing
D = Drum Mixing
Column eight:Plant size:
Batch Plant - Number ks (pounds) X1000/Batch
    Example: 1000 pounds = 01
    3500 pounds = 04
    35000 pounds = 35
Continuous or Drum - Number tons X10/hour
    Example: 100 tons/hour = 01
    650 tons/hour = 06
    750 tons/hour = 08

BULLETIN 41 MANUFACTURERS CODE

AA = ACS Aeoco
AC = Allis Chalmers - (Std. Steel)
AE = Aggregate Equipment
AQ = Asphalt Equipment Co (AEDCO)
AM = Allmix
AS = Assembled
AZ = Aztec Industries
BA = Ballard
BC = Boeing Constr. Equipment Co.
BG = Barber Green
BM = BMG
BO = Barber Asphalt
CA = Catapiller, Inc.
CB = Custom Built
CE = Cutler Engineering
CL = Clark Equipment
CM = CMI
CR = Cedar Rapids
CS = Cold Stabilization
DL = Dillman
FG = F. D. Ginmer & Sons
FS = Fab Spec Co.
GC = Gencor Industries Inc.
HB = Hetherington Berner
HE = Heilman (owner built)
HG = Herman Grant
H I = Hilliard
HR = Huett/Robbins
GC = Gencor Ind. Inc.
LF = Littleford
L I = Lancaster Iron Works (Iroquois)
MC = McCarter
MD = Madsen
MI = Midwest
MP = Midland Pugmill
NY = New York Central
P I = Pioneer
PO = Posey Iron Works
SH = Standard Havens
S I = Simplicity
ST = Standard Steel
WE = Wisconsin Electric Co.
OO = Unknown